1 DISCOVER
Discover devices automatically
One scan of your network adds detected devices to your configuration, with no manual integration work.
HARDWARE INTEGRATION
Choose the best hardware for the job.
Revel works across vendors, so test engineers can move faster.
Control your hardware with Revel.
Vendor agnostic
Run different vendors side by side, with one set of dashboards and control logic.
Setup in hours
Start testing within 24 hours of setup, like Orbital Operations.
Control from 10 Hz to 1 kHz
Set the control rate your system needs, from a slow thermal soak to a 1 ms valve response.
It was obvious right away that this was going to be a game-changer. With legacy software, you need to work through individual industrial protocols to connect with controllers if they're not in the same family. But with Revel, we just connected to everything seamlessly.
Ben Anderson
Instrumentation and Controls Engineer — Aalo Atomics
With Revel, we can actually use National Instruments hardware mixed with industrial hardware like IFM...Being able to have one codebase or one system that we can run on all of our different test assets and all the different hardware platforms has never been able to be done before.
Dane Sarcone
Principal Test Engineer — Impulse Space
We were able to reuse all of our existing hardware...No issues with compatibility. It just worked out of the box.
Mitch Calder
Lead Test Engineer — Astro Mechanica
2 CONNECT
Mix and match vendors
A LabJack and an NI cDAQ on a test stand, or Allen-Bradley remote I/O and a Watlow controller on a process loop, share one configuration.
3SWAP
Swap hardware without code changes
Code and dashboards reference named channels, not specific devices, so swapping hardware only takes channel remapping.
4 INSTRUMENT
Run systems with 50k channels
Run anything from a simple bench test to a vehicle with thousands of sensors.
5 EXECUTE
Control hardware deterministically
Logic runs once every cycle, on a fixed period you set, and an alert fires on the cycle its trigger condition is met. Modules you set to high-speed mode capture data up to 500 kHz alongside the control cycle.
Change the hardware. Keep your test logic.
Revel is the control infrastructure to test and operate hardware safely.
RevelCode
A programming language purpose-built for hardware control.
RevelTest
Design and run hardware tests in minutes, not months.
